Advice For Use; Mowing Method; Cutting Height - pellenc RASION 2 EASY Operating Instructions Manual

Flashing error code for safety shut down:
Caution
If the blades are already moving, turn-
ing the mower into a vertical posi-
tion or tipping it over will not stop the
blades.

5.5. ADVICE FOR USE

To get the best results when mowing a lawn and save time you should follow a certain method. Mow from the
edge to the center. You should mow transversely. To make the height of the grass even, you should cut in different
directions. However, you should take greater care when mowing on sloping ground to avoid tipping the lawn mower.
After mowing, the cut grass must be collected if it has not been mulched. Otherwise, residue can choke the lawn
and prevent it from keeping its green color.

5.5.1. MOWING METHOD

1. Clear the edges of the area, if possible using the
mower, otherwise using a brush cutter.
2. Mow by going forwards and backwards, first length-
wise.
3. Then change direction and mow crosswise.
Note
Try to overlap slightly on the previous line to attenuate the mowing lines and obtain a uniform lawn.

5.5.2. CUTTING HEIGHT

The cutting height depends both on the type of lawn that has been sown and the aesthetic appearance you wish
to obtain:
26
LAWN MOWER RASION 2 EASY
59_141654-B
59N_18_056
59N_18_058