Advertisement
Empty Dirt Tank
The dirt tank needs to be emptied when the dirt reaches the 'Full'
line on the side of the tank.
1.
Unplug hard floor cleaner from electrical outlet.
2.
Remove the easy empty dirt tank from the unit by moving
the lock button on the front of the unit to the left.
3.
Press the bottom lid release button on the back of the dirt
tank to empty dirt.
4.
The dirt tank also has a built-in drop-it system for easy
debris emptying.
5.
In the middle of the vacuum filter attached to the top of the
dirt tank locate the coloured rod.
6.
Pull the rod up and lock the rod in place by turning it
clockwise.
7.
Push down on the lever to flush out stuck debris.
8.
When done, rotate the colour rod anticlockwise and push it
down to return it to its original position.
9.
Close the bottom lid, mount the easy empty dirt tank back on
the vacuum base and push the lock button to the right until it
is centred on the front of the unit.
Note:
The dirt tank may be washed in warm water with a mild detergent. Make sure it is
completely dry before reinstalling in the unit.
Advertisement
