Advertisement
Cleaning or Replacing the Vacuum Filter
The key to maximum performance is having a clean filter. Cleaning the filter after each use
will help your vacuum to operate at peak efficiency.
To clean the filter
1.
Turn power off and unplug the unit.
2.
Remove the dirt container from the unit, as directed above.
3.
Remove the filter and tap firmly against the inside of a waste container, removing
any visible dirt.
4.
Replace the filter back into the dirt container and attach the dirt container to the
base of the unit. Slide the lever to your right to lock.
Note:
After heavy usage, you may clean the pleated filter by gently handwashing it.
Replacing the Water Filter
It is recommended to fill your unit with distilled water only. Periodically check your water filter.
When the green grains turn blue, change your water filter.
If the filter is not changed at the appropriate time, calcium deposits may accumulate on the
heater, causing damage or reduced performance.
To replace the filter
Using the grips on the side of the filter, pull the filter out of the unit. Push the new filter firmly
into the handheld unit.
Water
Filter
Stainer
Dust Cup
Advertisement
