Advertisement
Note:
Upon the first use of the Vacuum and Steam Cleaner or first use after refilling the
water tank, the pump may make a 'knocking' sound. This is normal and could
last up to 30 seconds.
Warning
1.
Do not operate appliance with damp or wet filters or without filters in place.
2.
Tinted plates on the floor head may get hot while the unit is in use. Do not touch
while it is hot.
3.
Never put descaling, alcoholic or detergent products into the steam cleaner, as this
may damage it or make it unsafe for use. Never put descaling, alcoholic or
detergent products into the steam cleaner, as this may damage it or make it
unsafe for use.
How to Use the Handheld Unit
Do not attempt to use your unit on the steam setting without water in the tank. You may
hear a knocking sound indicating there is no water.
1.
Plug the power plug into the power socket.
2.
Start the power switch on the handheld unit to power the appliance. The light
flashes after power on until the flicker stops.
3.
The steam function can be used by pressing the steam trigger button.
4.
Press the Steam button on the control panel to cycle through the intensity options.
Water Tank
Trigger Button
Advertisement
