Table of Contents
Advertisement
iC-7 DISPLAY DASH OVERVIEW
The iC-7 Display Dash is available in two kits:
This quick start guide will walk you through the
installation of a Haltech iC-7 Display Dash into
Part No. HT-067010 is pre-configured for
a vehicle already fitted with a Haltech ECU or
connection to all Haltech ECUs via a supplied
equipped with an OBD-II port.
DTM-4 to DTM-4 CAN extension cable.
This guide is accompanied by the Help
Part No. HT-067012 is pre-configured for
information available within the iC-7 software
connection to an OBD-II port via a supplied
(iCC), located on the USB key provided.
DTM-4 to OBD-II CAN cable.
What's in the box?
• Haltech iC-7 Display Dash
• 34 Pin main connector harness
• DTM-4 to OBD-II CAN cable
(with HT-067012)
• DTM-4 to DTM-4 CAN cable
(with HT-067010)
• USB to M5 right angle cable
• USB cable
• Mounting screws
• 10 x spare pins to suit AUX connector
• USB flash drive with iCC software
• Quick start guide
• Haltech product catalogue
• Haltech stickers and a keyring
2
3
iC-7 DISPLAY DASH OVERVIEW
FRONT VIEW
1 Display Screen
2 Control Buttons
3 Shift / Alarm Light Panel
4 Ambient Light Sensor
REAR VIEW
5 Comms Connector
6 Auxiliary Connector
7 Mounting Screw Holes
Advertisement
Table of Contents
