Table of Contents
Advertisement
To set individual dimmers to different levels:
1:
In the Dimmer menu option, all dimmers are selected by default, either 1 thru 12 or 1 thru 24,
depending on the ColorSource model.
2:
To select an individual dimmer, set the first and last dimmers to the same number. Highlight the
Dimmer menu option. Press the [Enter] (
button to select the dimmer. Press the [Enter] (
the [Increase] (+) or [Decrease] (–) button to select the same number. For example, setting both
start and end of range numbers to "1" selects dimmer #1, individually. When finished, press the
[Enter] (
3:
In the Level menu option, 100% is set by default. To change the level, press the [Enter] (
button and then the [Increase]
button.
4:
In the Set menu option, press the [Enter] (
5:
Repeat steps 2 through 4 to set the remaining dimmers.
6:
This activates the dimmers at the levels you selected. This can be verified on the Home screen,
by pressing the [Home] (<<) button.
ColorSource ThruPower
L1: OK L2: OK L3: OK
Exit the test
1:
In the Dimmer menu option, press the [Enter] (
[Decrease]
2:
Press the [Enter] (
of range to the total number of dimmers, either 12 or 24. When finished, press the [Enter] (
button.
3:
Highlight the Release All menu option and then press the [Enter] (
4:
This turns off all the dimmers, ending the test. This can be verified on the Home screen, by
pressing the [Home] (<<) button.
ColorSource ThruPower
L1: OK L2: OK L3: OK
20
) button.
System OK
DMX Start = 1
V#.#.#.#.#.#
(–)
button to set the start of range to 1.
) button and then the [Increase]
System OK
DMX Start = 1
V#.#.#.#.#.#
) button and then the [Increase] (+) or [Decrease] (–)
) button again to set the end of range, and press
(+)
(–)
or [Decrease]
button. When finished, press the [Enter] (
) button.
) button and then the [Increase]
(+)
(–)
or [Decrease]
button to set the end
) button.
ColorSource ThruPower User Manual
)
)
(+)
or
)
Advertisement
Table of Contents
