Table of Contents
Advertisement
To set all dimmers to the same level:
1:
In the Dimmer menu option, all dimmers are selected by default, either 1 thru 12 or 1 thru 24,
depending on the ColorSource model.
2:
In the Level menu option, 100% is set by default. To change the level, press the [Enter] (
button and then the [Increase]
button.
3:
In the Set menu option, press the [Enter] (
the level you selected. This can be verified on the Home screen, by pressing the [Home] (<<)
button.
ColorSource ThruPower
L1: OK L2: OK L3: OK
To set groups of dimmers to different levels:
1:
In the Dimmer menu option, all dimmers are selected by default, either 1 thru 12 or 1 thru 24,
depending on the ColorSource model.
2:
To select a range of dimmers, press the [Enter] (
[Decrease]
last dimmer in the range, using the [Increase]
the [Enter] (
3:
In the Level menu option, 100% is set by default. To change the level, press the [Enter] (
button and then the [Increase]
button.
4:
In the Set menu option, press the [Enter] (
5:
Repeat steps 2 through 4 to set the remaining groups of dimmers.
6:
This activates the groups dimmers you chose, at the levels you selected. This can be verified on
the Home screen, by pressing the [Home] (<<) button.
ColorSource ThruPower
L1: OK L2: OK L3: OK
Menu structure
(+)
System OK
DMX Start = 1
V#.#.#.#.#.#
(–)
button to set the first dimmer. Press the [Enter] (
) button.
(+)
System OK
DMX Start = 1
V#.#.#.#.#.#
(–)
or [Decrease]
button. When finished, press the [Enter] (
) button. This activates the dimmers you chose, at
Dimmer level
display
) button and then press the [Increase]
(+)
or [Decrease]
(–)
or [Decrease]
button. When finished, press the [Enter] (
) button.
) button again and then set the
(–)
button. When finished, press
)
)
(+)
or
)
)
19
Advertisement
Table of Contents
