Advertisement
8
Step 4
Lean the PowerHub USB-C on the bottom of the cutout in the furniture
and push it into the cutout by rotating it slightly
Step 5
Fasten the 4 cross head screws to fix the PowerHub in the furniture.
Step 6
Align the selected trim (black or metallic) with the PowerHub USB-C
ensuring that the 2 small cutouts on the trim are on the bottom. Press
firmly and evenly to clip the trim into place.
Step 7
Finally insert the plug on the end of the rear power cable into an ap-
propriate 120V mains outlet.
Installation is now complete.
Fitting PowerHub USB-C through the cutout
Additional Information
USB Charging
The PowerHub USB-C provides 2 USB-A charging ports on the front
of the unit which can each provide 2.4A at 5V. In addition there is a
USB-C port which can provide 3A at 5V.
Please note these are the maximum charging rates. The actual rate
will depend upon many factors including the phone model, phone
battery status and charging cable used.
Removing the PowerHub USB-C from Furniture
If you need to remove the equipment for any reason, first ensure the
equipment is disconnected from the mains power source.
1.
Unplug the PowerHub USB-C from the mains supply.
2.
Use a medium flat blade screwdriver to release 2 clips on the
bottom of the trim.
3.
The trim can now be gently removed by hand. Be careful not to
bend the trim excessively or it may deform or break.
4.
Unscrew the 4 cross head screws and carefully withdraw the unit
from the furniture being careful not to damage any cables.
9
Advertisement
