rada 425-t3 Product Manual page 4

The Rada 425-t3 Thermostatic mixing valve is specified to meet the highest standards
of safety, comfort and economy as demanded by todays users. The Rada 425-t3 is
designed, manufactured and supported in accordance with accredited BS EN ISO
9001:1994 Quality Systems.
This Manual covers all Rada 425-t3 Thermostatic mixing valves manufactured from
May 2001.
The suffix t3 indicates that the valve has been certified for use in UK healthcare
premises as a Type 3 mixing valve under the TMV3 scheme. Where this product is to
be used in such an installation, particular Application, Installation, Commissioning
and Maintenance requirements apply. These are given in the section 'TYPE 3 VALVES'.
A 1" inlet/outlet thermostatic mixing valve employing the unique 'thermoscopic'
temperature sensor to provide water at safe, accurate temperatures for ablutionary
or process requirements.
Rada 425-t3 c -
INTRODUCTION
DESCRIPTION
Exposed model, surface mounted. Angle inlet checkvalve
elbows rotate to accept rising, falling or rear-fed supplies.
4