Table of Contents
Advertisement
4.
NOTICE:
5.
Using a #2 Phillips screwdriver, remove the indicated hardware
6.
Using a #2 Phillips screwdriver, install the new Speed Sensor.
loop.
NOTICE:
7.
Re-install all remaining parts that were removed in reverse order.
NOTICE:
8.
Final Inspection
Inspect your machine to ensure that all hardware is tight and components
Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the
Owner's Manual.
Cable support loop
Resistance
cable
harness
Speed sensor
42
Speed sensor
wire
Speed sensor
Hide quick links:
Advertisement
Table of Contents
