Screen Description; Turning The Controller Off - EUROSTER 11Z User Manual

EUROSTER 11Z – USER MANUAL

6. SCREEN DESCRIPTION

Active LCD screen elements have been presented below:
1. Names of the set parameter - displayed during setting monitoring or changing
2. Heat source (boiler) temperature sensor symbol
3. Test operation symbol - on during tests
4. Alarm symbol - pulsating in case of an emergency situation
5. Furnace condition presentation (heat source temperature) - description below
6. Hot water pump symbol - on during pump operation
7. Central heating pump symbol - on during pump operation
8. Boiler temperature / Values of the presented parameter
9. Tank temperature / Menu item number
10. Tank temperature sensor symbol
11. Hot water priority on signalling
Animated presentation of furnace condition only serves information purposes - it
does not influence controller operation.
Operation:
Overheating:
Damping:

7. TURNING THE CONTROLLER OFF

• Set power switch (6.) into position I.
• After turning off software version and compilation date are displayed for 2 seconds.
• ANTY STOP system for switching on the pump - AS displayed on the screen.
• System condition is being displayed on the screen.
• After first switch on, correct controller setting (chapter 9).
<-> - supply temperature ranging between 35 - 90ºC
<-> - supply temperature > 90ºC
- supply temperature < 35ºC
3