EUROSTER 11B User Manual

EUROSTER 11B User Manual

Utility hot water tank pump controller

Advertisement

Quick Links

EUROSTER 11B USER MANUAL
UTILITY HOT WATER TANK PUMP CONTROLLER
MANUFACTURER: P.H.P.U. AS, Polanka 8a/3, 61-131 Poznań, POLAND
1

INTRODUCTION

Carefully study this user manual to learn how to correctly operate the EUROSTER 11B utility
hot water tank pump controller.
2

FIELD OF APPLICATION

EUROSTER 11B is a modern microprocessor-based controller used to control utility hot water
(UHW) tank pump. It turns the pump ON if tank water temperature drops excessively.
Additionally, it protects the tank against chilling out in case of a low temperature or extinction
of the boiler.
The EUROSTER 11B controller features the ANTY STOP
function that prevents idle pump rotor against seizing. Once
the heating season is over, every 14 days the function
automatically turns ON the pump for 30 seconds. To that end
the controller must be left powered up.
3

VISIBLE CONTROLLER ELEMENTS

4

INSTALLATION

Hazardous voltages may be present inside the controller and on its cables.
Therefore it is expressly forbidden to install the device prior to disconnecting
its mains power supply. Only qualified technicians may install the controller.
Do not install any devices showing signs of any mechanical damage.
EUROSTER 11B
1. 230 VAC~ mains input
2. 230 VAC~ power supply to pump
3. Input for the UHW tank temperature sensor cable
4. Input for boiler temperature sensor cable
5. Mains switch
6. LCD display
7. Knob
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 11B and is the answer not in the manual?

Questions and answers

Summary of Contents for EUROSTER 11B

  • Page 1 UTILITY HOT WATER TANK PUMP CONTROLLER MANUFACTURER: P.H.P.U. AS, Polanka 8a/3, 61-131 Poznań, POLAND INTRODUCTION Carefully study this user manual to learn how to correctly operate the EUROSTER 11B utility hot water tank pump controller. FIELD OF APPLICATION EUROSTER 11B is a modern microprocessor-based controller used to control utility hot water (UHW) tank pump.
  • Page 2 EUROSTER 11B USER MANUAL The procedure: a) Mount the controller: using a pair of supplied nylon nail-it fasteners (anchors) mount the controller box on a  wall (or any other suitable supporting structure) using fasteners fix controller cables to the wall.
  • Page 3 EUROSTER 11B USER MANUAL Animated icon that visually presents state of the heat source (boiler) furnace is for information purposes only, it does not influence operation of the controller in any way. Normal operation: <-> supply temperature between 35ºC and 90ºC ...
  • Page 4 EUROSTER 11B USER MANUAL 2. Pump hysteresis Difference between the temperature at which the controller turns the pump on and the temperature at which the controller turns it off. See section 9 below for details. 3. Boiler-tank temperature surplus Heat source temperature must be higher than UHW tank temperature for two reasons: (i) to provide good heat transfer efficiency, and (ii) to compensate for heat losses between the boiler and the tank.
  • Page 5 Controller knob operates erratically Pulse generator failure. Have the controller serviced. 12 COMPATIBILITY WITH STANDARDS/CERTIFICATES The EUROSTER 11B controller meets all requirements of the EMC and the LVD EU Directives. The CE Conformity Declaration is available on the http://www.euroster.com.pl Internet webpage.
  • Page 6 EUROSTER 11B USER MANUAL 15 CONNECTION DIAGRAM Diagram presented below is simplified (not every element necessary to correctly operate the system is shown). 1. EUROSTER 11B controller 2. UHW tank temperature sensor 3. UHW tank 4. UHW tank pump 5. CH boiler (heat source) 6.
  • Page 7 EUROSTER 11B USER MANUAL EUROSTER 11B CONTROLLER WARRANTY CERTIFICATE Warranty terms: 1. Warranty is valid for 24 months from the controller sale date. 2. Warranty is valid exclusively on the territory of Poland. 3. Claimed controller together with this warranty certificate must be supplied to the seller or directly mailed via Poczta Polska mail operator to the manufacturer.

Table of Contents