Miele KM 6357 Operating And Installation Instructions
Ceramic cooktop with induction
Hide thumbs
Also See for KM 6357:
- Operating and installation instruction (84 pages) ,
- Operating and installation instructions (84 pages) ,
- Operating and installation instructions (72 pages)
Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Miele KM 6357
Summary of Contents for Miele KM 6357
-
Page 1: Installation Instructions
Installation Instructions KM 6357, KM 6386 en - CA Installation, repair and maintenance work should be performed by a Miele authorized service technician in accordance with national and local safety regulations and the provided installation instructions. -
Page 2: Safety Instructions For Installation
Safety instructions for installation The appliance must be installed by a qualified professional and connected to the electric power supply by a qualified electrician. The cabinet and the hood above the cooktop must be installed before the cooktop to avoid damaging it. The countertop must be heat-resistant (up to 100°C), so that it does not become deformed or the... -
Page 3: Safety Clearances
Safety clearances Safety clearance above the cooktop For an exhaust hood above the cooktop, always use the clearance specified by the hood manufacturer. If there are no specifications from the hood manufacturer or if flammable materials (e.g. a utensil rail) are installed above the cooktop, the clearance must be at least 760 mm. - Page 4 Safety clearances Safety clearances to the sides and back of the cooktop There may be a cabinet or a room wall of any height at the rear and on one side (right or left) of the cooktop (see illustrations). a 50 mm minimum distance between Not permitted! the back of the countertop cut-out and the rear edge of the countertop.
- Page 5 Safety clearances Minimum clearance underneath the Protective base cooktop Installation of a protective base under the cooktop is allowed but not required. To ensure proper ventilation of the cooktop, a minimum clearance is A gap of 10 mm at the back is required required between the appliance and an for the power supply cable.
- Page 6 Safety clearances Safety clearance to a wall covering A safety clearance must be maintained between the countertop cut-out and any wall covering to protect it from heat damage. If the covering is made of a combustible material (e.g. wood), a safety clearance e of 50 mm must be maintained between the cut-out and the covering.
-
Page 7: Instructions For Installation
Instructions for installation Seal between cooktop and Tiled countertop countertop The cooktop must not be sealed with joint sealant. Cooktop and countertop could get damaged if the cooktop needs to be removed. Do not use a joint sealant between cooktop and countertop. The seal under the edge of the upper part of the cooktop provides an adequate seal against the countertop. -
Page 8: Building-In Dimensions
Building-in dimensions KM 6357 a Front b Casing depth c Connection for Miele|home d Mains connection box The mains connection cable (1440 mm long) is supplied separately. - Page 9 Building-in dimensions KM 6386 a Front b Casing depth c Connection for Miele|home d Mains connection box The mains connection cable (1440 mm long) is supplied separately.
-
Page 10: Electrical Connection
A dedicated line and junction box household electrical supply. This should be used to connect the data must correspond to prevent KM 6357 to a 40 A circuit and the appliance damage. Consult an KM 6386 to a 50 A circuit. electrician if in doubt. -
Page 11: Technical Service, Data Plate
In the event of a fault which you cannot easily fix yourself, please contact the Miele Technical Service Department at the address on the back of this booklet. When contacting Technical Service please quote the serial number and model of the appliance. - Page 15 For the most updated manual, visit the Miele web site.
- Page 16 KM 6357 / KM 6386 en - CA M.-Nr. 09 330 060 / 02...