Timer - Miele KM 6360 Operating And Installation Instructions

Timer

The cooktop has to be turned on if
you wish to use the timer.
You can set a time between 1 minute
() and 9 hours (.).
The timer can be used for two different
functions:
- For setting the timer
- For turning off a cooking zone auto-
matically.
A time up to 99 minutes is set and dis-
played in minutes.
In case of a time of more than 99 min-
utes, the timer must be switched to
hours (h). The time is set in half-hour
steps. Half-hours are indicated by a dot
following the number, for example, 2 h
30 min:
h
36
Timer
Setting the minutes
Example: You want to set a time of
15 minutes.
 Turn the cooktop on.
 Tap the  sensor button.
The  sensor button flashes.  ap-
pears in the timer display, and the right
 flashes.
First the tens digit is set then the units
digit.
 Tap the sensor button on the control
scale that corresponds to the tens
position (1 in this case).
The timer display will change and  will
start flashing on the right.
 Tap the sensor button on the control
scale that corresponds to the ones
position (5 in this case).
The timer display will change.  jumps
to the left and  appears on the right.
After several seconds, the  sensor
button and timer display light up con-
stantly. The timer starts to count down.