Table of Contents
Advertisement
Set device in pairing mode
When the device is first turned on, it may automatically enter pairing mode (making a
"beep" sound).
If not automatically in pairing mode when powered on, you can manually set the device in
pairing mode by long-pressing the Drying and Rear Wash buttons simultaneously until you
hear a prompt tone (beep).
Add device through network
5.
Once registered, tap "+" in the upper right corner of the app's home page to add a
new device through the network.
6.
Select the product type from the list of options in the app (Other > Smart Bidet
Seat).
7.
Ensure that the device is in pairing mode, with the prompt tone heard, and tap
"Next step".
Advertisement
Table of Contents
