Table of Contents
Advertisement
2.
Toilet Seat Installation
Remove original toilet seat
•
Loosen bolts with wrench
•
Remove the nut and gasket,
remove the toilet seat
Install fix bracket
•
Before the installation, please put the product on the toilet bowl to check for
correct fitting.
•
Embed and install the rubber sleeve, fix bracket, metal bracket as shown below.
•
Insert the mounting bolt and tighten it so that the fix bracket cannot move.
•
If the product does not match the toilet bowl ideally, please loosen the mounting
bolts, take the metal gasket out, readjust the position of the fix bracket, then insert
the metal gasket and tighten the bolt.
The fix bracket
can adjust the
range within
130-170mm
Bolt
Gasket
Nut
Screw
Release
Mounting bolts
Metal Bracket
Fix Bracket
Rubber Sleeves
Toilet
Seat
Advertisement
Table of Contents
