Control Panel - Kogan KASMABIDETA User Manual

Control panel

1. Stop
2. Front
3. Rear
4. Dry
5. Seat temp
6. Clean
7. Light
8. Pressure
Stop the current cleaning operation. If do not press stop button, rear washing/
front washing will stop automatically after 2 minutes
Press Front, nozzle reaches out to work; Press again change to front oscillating
cleansing, nozzle repeatedly swings back or front. Press again to stop oscillating
cleansing, Switch back to front wash.
Press Rear, nozzle reaches out to work; Press again change to rear oscillating
cleansing, nozzle repeatedly swings back or front. Press again, stop oscillating
cleansing. Switch back to rear wash.
Press this button to start warm air drying. Press Stop to turn off the drying
function. or the warm air will stop automatically after running for 4 minutes.
The seat temperature can be adjusted in 4 levels:
Room temperature
(No light)
Press the seat temp button to cycle through the settings.
Note: To prevent the low temp burn, the machine automatically reduces the
seat temp below 35°C after sit on the seat for 10 minutes.
Press Clean to enter nozzle cleaning, then water flows out to clean nozzle.
Repeatedly press this button, the nozzles switch between rear and front
cleansing, then you can clean and replace the nozzles.
Nozzle clean is effective when people are not seated.
Nozzle will automatically clean the peripheral part of the nozzle before rear wash
and front wash.
Press this button, the indicator lights up and the night light turns on. Press this
button again, the indicator is off, the night light is also off, it could be switched
repeatedly.
Select from four levels, adjust comfortable water pressure by pressing + or –
buttons.
33°C
(Blue)
(Green)
36°C
39°C
(Red)