Table of Contents
Advertisement
INSTALLATION:
Connect the included power adaptor to the HeadAmp4
input jack and plug the adaptor into an appropriate AC
power outlet.
Connect the stereo line-level output or headphone
output from the mixer, tape deck, CD player, another
headphone amplifier, etc. to the HeadAmp4 stereo input
using a low noise stereo T/R/S (Tip, Ring, Sleeve) patch
cord.
A Monaural source, such as a mixer's monitor output,
can be connected to the HweadAmp4 input by using a
mono T/S to stereo T/R/S patch cord or adaptor. (The
Stereo T/R/S plug would have the Tip and the Ring tied
together so that the same mono signal is input to both
the left and right channels,. With an unmodified stereo
cord attached, sound will be present in one ear only.
Connect the headphones to the output jacks and adjust
the controls as required.
Advertisement
Table of Contents
