Advertisement
1a Edge Installation
B
Pole
F
Silicone
Pads
C
Desk Clamp
Assembly
1
G
M10x20mm screw
2
• Determine the mounting location, and then place the desk mount over the edge of the desk so that
the clamp fully contacts the desk edge.
• Turn the knob to make clamp fit to the desk edge, then secure it tightly.
NOTE
Min. Desktop Thickness = 10mm (0.39") / Max. Desktop Thickness = 88mm (3.46")
3
NOTE
Insert security pin of
desk clamp assembly (C) in
one of the small two holes of
pole (B) to center align them.
Attach the desk clamp assembly (C)
to the pole (B) with a M10x20mm
screw (G) and tighten the screw using
a 6mm Allen key (J). Peel backing
from the silicon pads (F) and
attach to the desk clamp.
6mm Allen Key
J
3
1b Grommet Installation
C
Desk Clamp
Assembly
1
Base Plate
E
2
F Silicone Pads
B
Pole
E
Base Plate
H
Pad
Hole
3
NOTE
Min. Hole Diameter = 10mm (0.39") / Max. Hole Diameter = 75mm (2.95")
For grommet installation,
disassemble the desk clamp (C) and
select the right parts.
Peel backing from the silicon pads (F)
and attach to the base plate (E).
NOTE
Insert security pin of
desk clamp assembly (C) in
one of the small two holes of
pole (B) to center align them.
Insert the adjust screw into
the base plate (E) through the hole and
pad (H). Then tighten the adjust screw
to hold the mount securely.
4
Advertisement
