68 Electrical installation
Connecting the generator cables
Connection diagram
■
Connection procedure
■
WARNING!
See and obey the safety instructions of the converter. If you ignore them, injury or
death, or damage to the equipment can occur.
WARNING!
Apply grease to stripped aluminum conductors before attaching them to non-coated
aluminum cable lugs. Obey the grease manufacturer's instructions.
Aluminum-aluminum contact can cause oxidation in the contact surfaces.
1. Open the door of the generator cable connection cubicle.
2. Remove the shroud that protects the generator cable connection busbars and cable
entries.
3. Ensure that foreign objects (screws, etc.) cannot fall inside the converter module.
Ensure that the cover on top of the converter modules is installed.
WARNING!
Foreign objects inside the converter module can cause eg, short-circuit. Injury
or death, or damage to the equipment can occur.
PE
U2
V2
W2
G
U1
V1
3~
W1
PE