Inspection Checklist - Task Force Tips MASTERSTREAM Series Instructions For Installation, Safe Operation And Maintenance

11.0 INSPECTION CHECKLIST

BEFORE EACH USE, the nozzle must be inspected for proper operation and function according to this checklist:
1. There is no damage to the appliance that could impair safe operation (e.g. dents, cracks, corrosion, missing, broken or loose
parts, damaged markings, or other defects)
2. The waterway is clear of obstructions
3. Coupling is tight and leak free
4. Gaskets are in good condition
5. Shaper moves smoothly to all positions
6. Nozzle fl ow is adequate as indicated by pump pressure and nozzle reaction
7. Shaper detent (if so equipped) operates smoothly and positively
8. Selector Ring moves smoothly to all fl ow positions and fl ush
9. The shut off valve (if so equipped) operates as designed and shuts the fl ow off completely
BEFORE BEING PLACED BACK IN SERVICE, nozzles must be inspected to this checklist;
1. All controls and adjustments are operational
2. Shut off valve (if so equipped) closes off the fl ow completely
3. There are no broken or missing parts
4. There is no damage to the appliance that could impair safe operation (e.g. dents, cracks, corrosion, missing, broken or loose
parts, damaged markings, or other defects)
5. The thread gasket is in good condition
6. The waterway is clear of obstructions
7. Nozzle is clean and markings are legible
8. Coupling is retightened properly
9. Selector ring is set to desired position
10. Shaper is set to desired pattern
NFPA 1962: Standard for the care, use, inspection, service testing, and replacement of fi re hose, couplings, nozzles and fi re hose appliances. (2013 ed., Section 5.3).
Quincy, MA: National Fire Protection Agency.
Any nozzle failing any part of the inspection checklist is unsafe and must have the problem
WARNING
corrected before use. Operating a nozzle that fails any of the above inspections is a misuse of
this equipment.
TASK FORCE TIPS, INC.
MADE IN USA • www.tft.com
©Copyright Task Force Tips, Inc. 2015
3701 Innovation Way, Valparaiso, IN 46383-9327 USA
800-348-2686 • 219-462-6161 • Fax 219-464-7155
LIM-045 September 15, 2015 Rev00