Personnel Requirements - Krautzberger MA-1 Operating Instructions Manual

Example for safety instructions in operating instructions
Safety instructions can refer to specific, individual operating instructions. Such safety instructions
are embedded in the operating instructions so that they do not disrupt the reading flow during the
execution of the action. The signal words described above are used.
1. Unfasten screw.
2.
CAUTION!
Pinching hazard at the lid!
Carefully close lid.
3. Tighten screw.
Special safety instructions
The following symbols are used in safety instructions to draw the attention to specific hazards:
Warning signs
Additional identifications
The following symbols are used in this manual to highlight operating instructions, results, lists, ref-
erences, and other elements:
Identification
ð
[Pushbutton]
'Display'
2.2

Personnel requirements

GB–8
Operating instructions
Type of danger
Warning – hot surface.
Warning – danger zone.
Explanation
Step-by-step instructions
Results of procedural steps
References to sections in this manual and other applicable docu-
ments
Lists without specified order
Operating elements (e.g. pushbuttons, switches), display ele-
ments (e.g. signal lights)
Screen elements (e.g. pushbuttons, assignment of function keys)
T-Dok-015-GB-Rev.0
mail@krautzberger.com, www.krautzberger.com