Related Manuals for Delta-q RQ Series
Summary of Contents for Delta-q RQ Series
- Page 1 RQ SERIES BATTERY CHARGERS USER MANUAL © 2021 Delta-Q Technologies Corp. All Rights Reserved. (PN: 710-0261 Rev 1 Date: April 2021)
-
Page 2: Table Of Contents
RQ Series Battery Chargers User Manual www.delta-q.com TABLE OF CONTENTS Original Safety and Operating Instructions ....................3 Warning ................................3 Danger ................................3 Attention ................................4 Danger ................................4 Safe Operating Instructions ........................5 EMC Declaration ............................6 Models ..............................7 Mounting Instructions .......................... -
Page 3: Original Safety And Operating Instructions
ORIGINAL SAFETY AND OPERATING INSTRUCTIONS This manual is for the Delta-Q Technologies RQ Series Industrial Battery Chargers. Read and comprehend this document fully before handling or working with any RQ Series battery chargers. Important safety, operating, and installation instructions are included. As well, this manual includes a link to a list of fault codes and error codes that help engineers take steps quickly to resolve issues. -
Page 4: Attention
RQ Series Battery Chargers User Manual www.delta-q.com Instructions importantes concernant la sécurité Conserver ces instructions. Ce manuel contient des instructions importantes concernant la sécurité et le fonctionnement. Attention Utiliser le chargeur seulement avec un algorithme approprié au type et capacitie spécifique de batterie. -
Page 5: Safe Operating Instructions
• When mated with a Delta-Q Technologies sealed AC cord, the charger meets IP66 specifications, making it dust-tight and protected against powerful water jets. If a cord set with an unsealed connector is used, the plug and connector must be periodically inspected to ensure the contacts are clean and dry. -
Page 6: Emc Declaration
A models of this equipment are available upon request. Note: If a Delta-Q Technologies sealed cord with an over-molded ferrite bead is not used, a clamp-on bead (LAIRD 28A0807-0A2 ) can be added to the AC cord to ensure Class B compliance. It should be positioned approximately the same distance from the charger as the beads on the DC and signal cables. -
Page 7: Models
12-20 Cells 40* - 250 Ah * Smaller pack sizes can be accommodated. Special testing or configuration may be required to ensure efficiency legislation compliance. Contact Support at Delta-Q Technologies if charging smaller pack sizes. MOUNTING INSTRUCTIONS Robust mounting points are cast into the charger’s aluminum enclosure. At each corner are 4.5mm x 8mm diameter slots, arranged to allow ample tolerance when mating with standoffs or pre-drilled holes in a machine. -
Page 8: Charger Interface
Fast Breathing Green = More than 80% charged Solid Green = Charge is complete 3. The Fault/Error Indicator indicates faults and errors. Visit the Delta-Q Technologies support website at https://support.delta-q.com and search for fault and error codes to review recommended actions. -
Page 9: Charging Algorithms
Almost every model of battery has different charging requirements and each application may add to those requirements. Delta-Q Technologies has established over 200 charge algorithms for the most common motive deep cycle batteries. These algorithms are designed to get the longest battery life and meet a variety of application environments. -
Page 10: Fault And Error Codes
RQ Series Battery Chargers User Manual www.delta-q.com Selecting a Charge Algorithm With Select Mode active, press and release the Charger button to advance through the charge algorithms. Repeat this step until the charger displays the desired algorithm. The selected charging algorithm will be displayed twice. -
Page 11: Acronyms
RQ Series Battery Chargers User Manual www.delta-q.com ACRONYMS The following table provides acronym definitions used within this guide. Term Definition Alternating Current American Wire Gauge Battery Management System Direct Current Electromagnetic Compliance Federal Communications Commission High Voltage Light Emitting Diode... - Page 12 Delta-Q Technologies Corp. 3755 Willingdon Avenue Burnaby, BC V5G 3H3 CANADA Web: www.delta-q.com Phone: +1.604.327.8244 Delta-Q Technologies Corp. 3755 Willingdon Avenue Burnaby, BC V5G 3H3 CANADA...
Need help?
Do you have a question about the RQ Series and is the answer not in the manual?
Questions and answers