Engine Oil - GEISMAR MP.12 Manual

Rail profile grinding machine
Table of Contents

Advertisement

5.1.6 – Engine oil
5.1.6.1 – Engine oil type
- RECOMMENDED OIL:
Use a detergent 4-stroke automotive oil equivalent to or higher than the
requirements for the API SJ service category, higher or equivalent.
Always check the API service label on the oil canister to ensure it is
marked with the label SJ or higher (or equivalent).
- AMBIENT TEMPERATURE:
SAE 10W-30 oil is recommended for general use. The other viscosities
indicated in the table can be used when the average temperature for the
place of use is within the indicated range.
Use of the engine with a low oil level may damage the
engine. This type of damage is not covered by the
distributors's limited warranty.
Ref. : 450100 FR
5.1.6.2 – Checking and adjusting oil level
Check oil level daily and adjust if necessary.
The Honda GX.270 engine mounted on the MP.12 type
machine must contain 1 litre of oil
- Cold engine
- Install the machine on a flat, horizontal surface
- Release the handle
and completely fold the operating arm
Item
holding back the machine to prevent it from suddenly
Item
toppling.
1
- Gently topple the machine into its operating arm and wedge it in
place
so
that
the
2
arm
base
is
horizontal.
| 37
P a g e

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for GEISMAR MP.12

Table of Contents