Safety Instructions And Pictograms - GEISMAR MP.12 Manual

1.4.5 – Safety instructions and pictograms
The safety instructions and pictograms must be present on the machine in the positions provided.
Should one of them be missing or damaged, a new one must be ordered immediately and fitted in the position provided.
If a part bearing a pictogram has been replaced, check that a new pictogram has been fitted on the new part.
REF Visual
12528
---
12937
37654
12569
12670
14
|
P a g e
Position
Stuck on the machine chassis
next to the operating arm
locking handle
(Yellow background)
Riveted to the machine frame
(For SNCF approved machine)
Riveted to the machine frame
(Except SNCF)
Stuck to the engine air filter
(Blue background)
Stuck to the storage box on the
operator side
(White background)
Stuck on each of the machine
carrying arms
(Blue background)
Riveted to the machine chassis,
above the wheel casing
REF Visual
12623
12412
67574
12543
Position
Stuck to the handling zones
(Blue background)
Riveted to the machine
chassis, above the wheel
casing (for the positioning
direction of this plate, see §
3.1 "Positioning the wheel ")
Stuck near the handling points
(White background)
Stuck on the tank
(White background)
Réf. : 450100 FR