2.4.3 – Transporting the machine
The machine must be transported by a
■
means of locomotion appropriate for its
weight and size.
Secure it thoroughly with straps at the
■
points defined
①
Item
Never transport the machine when the
■
engine is running.
The machine must be transported only
■
in the position shown opposite, in order
to avoid fuel leaks or oil backflows that
could cause starting problems the next
time it is used. The wheel must be
disassembled.
Never transport the rail profile grinding
■
machine in a vehicle when the wheel is
assembled.
1
Ref. : 450100 FR
2.4.4 – Installing the machine on
the rail
With the help of 4 operators, grip the
■
machine by the 4 carrying zones
(see chapter 2.4.1 – Load distribution)
In a coordinated movement and on the
■
orders of one of the operators, lift the
machine in order to move it and place it
on the rail to be ground (See chapter 2.7
– Operator position)
The operator must be positioned inside
■
the track, with the engine outside the
track
④
Item
The rollers must run freely on the rail.
■
The machine must be held in horizontal
■
position or be wedged to prevent it from
toppling backwards or forwards
To transport the machine, the engine must
be stopped.
②
Item
4
2
| 21
P a g e