CHAPTER 4 – Using the machine
4.1 – Starting and stopping
The machine must only be started once it is on the track
■
Starting
- Open the fuel valve Item
.
- Place the starter pull cord Item
use the starter when the engine is hot or when atmospheric temperature is
high) and adjust the engine speed to the slowest speed.
- Start the engine:
Gently pull on the automatic starter until the compression point is
-
reached
Give a brisk tug to start the engine
-
Repeat if necessary
-
- Let the engine idle for a few moments until speed stabilises and engine
temperature rises.
- When the engine starts to heat, gradually bring the starter pull cord to the
opening position.
- Once the engine is hot, increase speed up to the maximum limit stop Item
(factory setting).
30
|
P a g e
on the closing position (if necessary, do not
The wheel must be retracted inside its protective guard once
grinding is complete. This precaution prevents operators from
accidentally coming into contact with a moving wheel and also
avoids destruction of the wheel or flying stones in the event of
incorrect operation.
■
Stopping the machine
Stop the engine by closing the fuel valve Item
(STOP position).
2
1
3
Réf. : 450100 FR