Operator Work Zone; Operator Work Position - GEISMAR MP.12 Manual

2.6 – Operator work zone
The operator work zone is located between the two rails of the same
track. This work zone guarantees that the operator works in optimum
safety conditions. Consequently (insofar as possible), the operator must
always be inside this zone.
If work calls for the operator to be outside this work
zone, safety conditions must be guaranteed,
particularly if work takes place without interruption of
Ref. : 450100 FR
WORK ZONE
traffic.
2.7 – Operator work position
During work, the operator must always be in the position shown in
the photo below with his hands firmly holding the operating handle.
To adjust wheel height, he must hold the operating handle in one
hand and, with the other, operate the wheel adjustment flywheel.
This work position guarantees perfect machine control.
Position de l'opérateur Operator position
| 25
P a g e