Chapter 5 - Servicing And Maintenance; Servicing; List Of Necessary Equipment And Accessories For Maintenance - GEISMAR MP.12 Manual

CHAPTER 5 – Servicing and maintenance

5.1 - Servicing

It is necessary to possess the training, skills and tooling required to
correctly service and repair the equipment.
Equipment servicing and repair can be performed only by personnel with
sound general mechanical knowledge.
Servicing and maintenance operation waste (worn cloths, filters, etc.) must
be treated as per prevailing regulations and environmental protection
directives.
5.1.1 – List of necessary equipment and accessories for maintenance
The following tools are required to perform servicing and maintenance operations correctly:
MP12 2-stroke engine
13x23 open-end wrench
-
Pin wrench
-
10 bent tube wrench
-
17 open-end wrench
-
4 H8x15 screws
-
4 W8 washers
-
2-stroke oil -100 mL
-
Measuring cup - 100 mL
-
Spark plug wrench
-
34
|
P a g e
Operating tools
(Supplied with the machine)
MP12 4-stroke engine
13x23 open-end wrench
-
Pin wrench
-
10 bent tube wrench
-
17 open-end wrench
-
4 H8x15 screws
-
4 W8 washers
-
Spark plug wrench
-
Usage safety relies largely on proper machine
servicing.
Immediately replace or repair all worn, damaged or missing
parts.
Servicing and maintenance tools
(not supplied with the machine)
- 10, 13, 16 and 18 open-end wrench
- Intra-screw wrench (Allen) 5, 6 and 8
- For special bracket wheel-holder
* 8 open-end wrench
* 13 bent tube wrench
- For 600Y wheel-holder: rod
This equipment list does not
exclude routine but essential
maintenance equipment items such
as cloths, brushes, grease, etc.
Réf. : 450100 FR