Control And Ergonomic Parts - GEISMAR MP.12 Manual

2.4.6 – Control and ergonomic parts
■ Operating arm locking handle:
- Operating arm ① FOLDED the operator can tilt the machine against
Item
himself to -90°
- Operating arm ① UNFOLDED the operator can tilt the machine in
Item
front of himself to 15°
■ Operating handle
Item
①
This handle lets the operator:
- Move the machine from right to left on the weld.
- Tilt the machine against himself up to -90°.
- Tilt the machine in front of himself up to 15°
1
INNER
OUTER
Ref. : 450100 FR
INNER OUTER
■ Wheel adjustment flywheel
Item
②
Used to adjust wheel lowering
- Turn the flywheel in a clockwise direction
- Turn the flywheel in an anticlockwise direction
wheel
3
Beyond 15° the engine will automatically cut off.
to lower the wheel
to raise the
2 1
| 23
P a g e