Repair - Task Force Tips G-Force Instructions For Safe Operation And Maintenance

Nozzle fixed, selectable, and automatic

Table of Contents

12.3 REPAIR

Factory service is available with repair time seldom exceeding one day in our facility. Factory-serviced nozzles are repaired by

experienced technicians, wet tested to original speciﬁ cations, and promptly returned. Repair charges for non-warranty items are

minimal. Any returns should include a note as to the nature of the problem and whom to reach in case of questions.

Repair parts and service procedures are available for those wishing to perform their own repairs. Task Force Tips assumes no liability

for damage to equipment or injury to personnel that is a result of user service. Contact the factory or visit the web site at www.tft.com

for parts lists, exploded views, test procedures and troubleshooting guides.

Performance tests shall be conducted on the G-Force nozzle after a repair, or anytime a problem is reported to verify operation in

accordance with TFT test procedures. Consult factory for the procedure that corresponds to the model and serial number of the

nozzle. Any equipment which fails the related test criteria should be removed from service immediately. Troubleshooting guides are

available with each test procedure or equipment can be returned to the factory for service and testing.

CAUTION

Any alterations to the nozzle and its markings could diminish safety and constitutes a misuse

of this product.

LIG-010 June 19, 2014 Rev03

Table of Contents