Approvals; Color Coded Valve Handle And Pistol Grip - Task Force Tips G-Force Instructions For Safe Operation And Maintenance

8.0 APPROVALS

Many TFT G-Force nozzle confi gurations carry the FM Approval rating. Consult www.tft.com for a complete list.

9.0 COLOR CODED VALVE HANDLE AND PISTOL GRIP

The TFT G-FORCE with lever type valve handles are supplied with black valve handle covers and pistol grips. The handle covers
and pistol grips are available from TFT in various colors for those departments wishing to color code the nozzle to the discharge
controls. A colored handle cover set will be sent upon receipt of the warranty card by TFT. Your department's name can also be
engraved on the covers (see warranty card for more information).
Handle covers are replaceable by removing the four screws that hold the handle covers in place. Use a 3/32" allen wrench when
replacing screws. Pistol grip is replaceable by following TFT instruction sheet LTT-108.
For standardization NFPA 1901 (A-4-9.3) recommends the following color code scheme:
Preconnect #1 or Bumper Jump Line
Preconnect or discharge #2
Preconnect or discharge #3
Preconnect or discharge #4
Preconnect or discharge #5
Preconnect or discharge #6
Preconnect or discharge #7
Foam Lines
©Copyright Task Force Tips, Inc. 2011-2014
Orange
Red
Yellow
White
Blue
Black
Green
Red w/ White border (Red/White)
9
Other Colors Available:
• Gray
• Pink
• Purple
• Tan
LIG-010 June 19, 2014 Rev03