Door Hardware / Decorative Hinges - Handy Home Products MONARCH Assembly Manual

PARTS REQUIRED:
BEGIN
Measure and mark location of hole on outside of right door as shown (Fig. A) .
1
Pre-drill hole with 1/4" drill.
Re-drill hole with 1/2" drill.
Keep drilled hole square
to trim to avoid breaking
edge of door stiffener.
2
Insert handle in hole and secure using 1-1/2" (3,8 cm) screws.
Attach inside handle and secure with set screw as shown.
3
Install decorative hinges centered on horizontal trim and flush to door hinge as shown.
Secure hinges using 3/4" screws.
FINISH
Your T-handle and decorative hinges are now installed.

DOOR HARDWARE / DECORATIVE HINGES

x1
SET
SCREW
x4
x12
3/4" (1,9 cm)
RIGHT DOOR.
1-3/4" (3,8 cm)
35-3/4"
(90 cm)
1-1/2" (3,8 cm)
44
x2
1-1/2" (3,8 cm)
1/2" (1,3 cm) Drill Bit
1/4" (0,6 cm) Drill Bit
Flush to door hinge
TOP VIEW
1-3/4"
(3,8 cm)
1/4" Pre-drill and
1/2" Drill-through.
Fig. A