Eave Soffit - Handy Home Products MONARCH Assembly Manual

PARTS REQUIRED:
DRA
x2
1 x 4 x 93-1/4" (2,5 x 7,6 x 236,9 cm)
¸
BEGIN
1 Fit eave soffit DRA under roof panel and between front and back gable trim.
Flush soffit to face of side wall panel (Fig. A).
Secure soffit to roof panel using 3/4" screws (Fig. A).
Repeat steps to install eave soffit on opposite side.
FINISH
Your eave soffits are installed.

EAVE SOFFIT

DRA
3/4" (1,9 cm)
Screws
3/4" (1,9 cm)
Screws
Flush to
face of panel
38
x56
3/4" (1,9 cm)
DRA
Fig. A