Door Hardware - Handy Home Products GABLE 8'x10' Assembly Manual

PARTS REQUIRED:
¸
BEGIN
Install top spring bolt to the upper end of PVC weatherstrip (Fig. A). Secure with (4) 1-1/4" screws.
1
Mark spring bolt pin location on over door frame.
Drill a 1-1/2" deep hole using a 3/8" drill bit.
2
Install bottom spring bolt to the lower end of PVC weatherstrip (Fig. B). Secure with (4) 1-1/4" screws.
Mark spring bolt pin location on fl oor.
Drill a 1-1/2" deep hole using a 3/8" drill bit.
LEFT
DOOR
FINISH
Your spring bolts are now installed.

DOOR HARDWARE

x2
3/8" BIT
(9,5 mm)
Fig. A
3/8" drill for bolt:
1-1/2" deep.
Weatherstrip
x4
1-1/4" (3,2 cm)
Fig. B
x4
1-1/4" (3,2 cm)
Weatherstrip
FLOOR
50
x8
1-1/4 (3,2 cm)
OVER DOOR FRAME
1-3/16"
Flush
Flush
1-3/16"
3/8" drill for bolt:
1-1/2" deep.