PARTS REQUIRED:
Ensure your floor frame is square by installing one panel and squaring the frame.
Install panels with rough side up (painted grid lines).
BEGIN
1
Attach the 48" x 92-1/2" panel with the 48" edge and corner flush to the floor frame (Fig A).
Secure panel using (2) 2" nails in the corners.
Move to the opposite side. Using the long edge of the panel as a lever, move the
2
panel side-to-side until the top corner is flush to the floor frame (Fig. B).
Maintain the 3/4" measurement along the left edge.
Secure panel using (2) 2" nails in the corners.
Continue securing the panel using 2" nails 6" apart on edges and 12" apart inside panel.
92-1/2"
(235 cm)
FLOOR PANELS
x1
48 x 92-1/2" (122 x 235 cm)
6" (15,2 cm)
Grid lines up
3/4"
GAUGE
BLOCK
3/4" GAUGE
BLOCK
12"
(30,5 cm)
48" x 92-1/2"
(122 x 235 cm)
11
x53
2" (5,1 cm)
Fig. A
3/4"
Flush
(2)
Nails
(2)
Nails
Fig. B
3/4"
Flush
Flush
Flush