Table of Contents
Advertisement
If you choose to install your kit on a concrete slab refer to the diagram below.
Treated Sill Plate
Caulk between sill plate
and concrete.
Building Size
10'x 8' (305 x 244 cm)
Allow new concrete slabs to cure for at least seven (7) days.
• A treated 2 x 4 (5 x 10 cm) sill plate is required when installing your shed on concrete. Hint: Use treated lumber in your kit or
purchase full length treated lumber.
• Use a high quality exterior grade caulk beneath all sill plates.
• Fasten 2 x 4 (5 x 10 cm) sill plates to slab using approved concrete anchors (fasteners not included).
• Check local code for concrete foundation requirements.
CONCRETE FOUNDATION
A
Actual Floor Size
10'x 7'-8-1/2" (305 x 235 cm)
Requires:
x2
2 x 4 x10' (5 x 10 x 305 cm)
x2
2 x 4 x8' (5 x 10 x 244 cm)
x1
Caulk
3-1/2"
(8,9 cm)
A
B
120" (305 cm) 85-1/2" (217,2 cm)
MUST be treated lumber.
MUST be treated lumber.
NOTES
8
B
4"
(10 cm)
C
92-1/2" (235 cm)
C
Advertisement
Table of Contents
