Rafter Assembly - Handy Home Products MONARCH Assembly Manual

PARTS REQUIRED:
x6
CXS
2 x 4 x 64-5/16" (5 x 10 x 163,4 cm)
x6
6 x 24" (15 x 61 cm)
BEGIN
1
Place (2) GAA blocks with 3/4" edge on floor in back corners, flush to side and back wall panels as shown.
Flush
GAA
2
Fit (2) rafters CXS flush to side wall panels and flush to the GAA blocks. Flush rafters at peak.
Place (1) 6" x 24" gusset on top of rafters. Install with 1/4" gap from top of rafter edge (Fig. A).
Secure using (12) 2" nails in pattern shown (Fig. A).
Flush
CXS
3
Flip rafter assembly and
nail another gusset
to back side.
Repeat STEPS 1 - 3 to build (2)
more rafter assemblies.
FINISH
Your rafters are now assembled.

RAFTER ASSEMBLY

x2 GAA
1 x 3 x 5"
(2,5 x 7,6 x 12,7 cm)
2" (5,1 cm)
Nails
Rafters flush tight at peak
34
x72
6" x 24"
Gusset
120"
(304,8 cm)
2" (5 cm)
GAA
Flush
Fig.A 1/4" (6 mm)
Gap
Gusset