Chain Hoist; Key Parts Of The Chain Hoist; Chain Drive - Verlinde STAGEMAKER SL10 508 M2 A D8+ Manual

3.3

Chain hoist

3.3.1

Key parts of the chain hoist

Afbeelding 7. Main components of the electrical chain hoist
1. Hoisting machinery
2. Buffer
3. Handle
4. Control cable and plug
5. Hook
3.3.2

Chain drive

The chain drive consists of the following components: the chain guide, chain sprocket, and
chain.
The chain is specially designed for the use in chain hoists. The chain is made of a high-strength
and ageing-resistant material, and the standard color of the chain is black. The dimension
tolerances of the chain have been precisely adapted to the chain drive.
To ensure a safe operation of the chain hoist, it is recommended to use only a genuine
NOTE
chain. Use a chain that is provided by the manufacturer of the chain hoist.
To reach the maximum service life of the chain, the chain must be lubricated regularly according
to the instructions. When you replace the chain, it may be necessary to replace also the chain
drive, either partly or completely.
Dit document en de daarin vervatte informatie vormt het exclusieve eigendom van Verlinde S.A.S. en vertegenwoordigt
een niet openbaar, vertrouwelijk en gepatenteerd handelsgeheim dat niet mag worden vermenigvuldigd, onthuld aan
derden, gewijzigd, of anderszins op enigerlei wijze mag worden toegepast zonder de uitdrukkelijke schriftelijke
toestemming van Verlinde S.A.S. Copyright 2020 © Verlinde S.A.S. Alle rechten voorbehouden.
8
7
6
1
5
6. Chain bag
7. Chain guide
8. Suspension (rotating suspension hook or
bracket suspension)
GEBRUIKERSHANDLEIDING
2
3
4
4/2020