Page 20 of 60
6.1 - Rigging the HALO-CS to an FG-HALO-C
IMPORTANT NOTE: -
ENSURE ALL PINS ARE SECURED BEFORE LIFTING
HALO Compact User Manual
Pin the captive front link on the
FG-HALO-C to the HALO-CS
position and remove the quick
release pin from the rear of the
FG-HALO-C.
Set the rear captive link of the
HALO-CS
to
the
extended
position.
Locate the front link of the FG-
HALO-C into the HALO-CS and
replace the quick release pin.
Locate the rear link of the
HALO-CS into the FG-HALO-C
and re-insert the the quick
release pin into the HALO-CS
rear link pin point.
Detailed views of these pin
positions are shown on the
following page.
V7 December 2019