Page 2 of 60 Contents DECLARATION OF CONFORMITY ........................ 5 1.0 - Introduction ............................. 6 2.0 - HALO Compact System Components....................7 HALO-C ................................7 HALO-CS ................................7 FG-HALO-C ..............................8 SM-HALO-C..............................8 FG-HALO-C ..............................8 HM-HALO-C ..............................8 3.0 – Safety................................. 9 System Overview ............................
Page 3
14.0 - Servicing Information ........................48 HALO-C: Removing the AMT high frequency drive unit ............48 HALO-C: Removing the LF Drive Unit ....................49 HALO-CS Subwoofer – Removing the LF drive unit ..............50 HALO Compact User Manual V7 December 2019...
Page 4
HALO-CS compact flyable reflex subwoofer .................. 52 Appendix B – Technical Drawings ......................53 Appendix C – Spare Parts List ........................59 Limited Warranty ............................60 Warranty Coverage ..........................60 Returning your EM Acoustics loudspeaker ..................60 HALO Compact User Manual V7 December 2019...
The packaging supplied with this product is recyclable. Please retain all packaging, however if disposing of this packaging please ensure that you comply with local recycling regulations. These products also all comply to the RoHS Directive 2002/95/EC. HALO Compact User Manual V7 December 2019...
EM Acoustics representative. The HALO Compact system is one of the only line array loudspeaker systems in the world to utilize genuine ribbon transducers for high frequency reproduction, resulting in incredible detail and clarity as well as superior feedback rejection.
Page 7 of 60 2.0 - HALO Compact System Components The HALO Compact system comprises two loudspeaker models and associated flying hardware. Details of the different components are given below – all enclosures and flying grids work on the same principles and use similar if not identical hardware.
A high-tensile bolt secures the HM-HALO-C into the desired position on the FG-HALO-C central spine, and a 13mm diameter hole in the top of the mount allows attachment of the desired clamping device. HALO Compact User Manual V7 December 2019...
Do not modify or alter the HALO Compact hardware or accessories, nor use them in any way other than that described in this manual. Rigging components supplied as part of the HALO Compact system are in no way interchangeable and should not be used as such.
Safety Inspections Carefully inspect all flying system components prior to use for defects or signs of damage prior to assembling a HALO Compact array. If any components damaged or you suspect them to be damaged, DO NOT USE THEM. Regular scheduled tests – which are much more rigorous than visual inspections – of all rigging components must also be carried out.
For safety and acoustic reasons, it is advised that users familiarize themselves with Ease Focus 3. Along with providing the user with accurate simulations for setting up HALO Compact, it also provides importing safety information with regards to load limits.
Page 12 of 60 5.0 – Rigging Overview 5.1 - FG-HALO-C Overview HALO Compact User Manual V7 December 2019...
Page 13
The captive front link allows for easy selection between flying a HALO-CS or a HALO-C to the flying frame. The link can also be stowed within the frame to protect it when not attached to a loudspeaker. HALO Compact User Manual V7 December 2019...
Information box at the rear of the grid gives a quick reference to maximum loads possible on the FG-HALO-C with various combinations of boxes HALO Compact User Manual V7 December 2019...
The Extension Bar can also be fitted in reverse with the extension to the front of the FG-HALO-C to allow for extra up tilt if required HALO Compact User Manual V7 December 2019...
Use the M12 bolt and washers supplied with the HM-HALO-C to secure the adapter in place Adapters such as rigging eyes or clamps can be attached to the HM-HALO-C to give the desired method of flying. HALO Compact User Manual V7 December 2019...
Quick release pin point for front of HALO-C [4] – Safety Information Label A Manufacturers safety information label is attached to the inside of the SM-HALO-C to identify the Serial Number, Date of Manufacture and SWL. HALO Compact User Manual V7 December 2019...
SWLs. Attaching Stand Adapter to SM-HALO-C Use the M10 bolts and washers supplied with the SM-HALO-C to attach the Stand Adapter through the holes shown in the diagram. HALO Compact User Manual V7 December 2019...
[4] – Lower Rear Pin Point HALO-C or another HALO-CS. Lower from link has options for attaching another [5] – Lower Front Link HALO-CS, a HALO-C, or to be stowed when not in use. HALO Compact User Manual V7 December 2019...
HALO-CS rear link pin point. Detailed views of these pin positions are shown on the following page. IMPORTANT NOTE: - ENSURE ALL PINS ARE SECURED BEFORE LIFTING HALO Compact User Manual V7 December 2019...
Page 21
Page 21 of 60 Detailed view showing front link position between the FG-HALO-C and a HALO-CS. Detailed view showing rear link position between the FG-HALO-C and a HALO-CS. HALO Compact User Manual V7 December 2019...
Lock the two HALO-CS together by pining the captive links to their opposite speakers Detailed views of these pin positions are shown on the following page. IMPORTANT NOTE: - ENSURE ALL PINS ARE SECURED BEFORE LIFTING HALO Compact User Manual V7 December 2019...
Page 23
Page 23 of 60 Detailed view showing front link position between two HALO-CS. Detailed view showing rear link position between two HALO-CS HALO Compact User Manual V7 December 2019...
HALO-C Overview The rear rigging label identifies the inter-box angles achievable with HALO Compact and indicates which of the A, B or C holes to use for the desired angle. The 0.5 degree hole is identified in red and the 1.5 degree hole in yellow.
Page 25
[4] – Lower Rear Pin Point from an additional HALO-C rigged below. [5] – Lower Front Pin Point The lower front pin point will mate directly with the upper front pin point of an additional HALO-C rigged below. HALO Compact User Manual V7 December 2019...
HALO-C rear link pin point. Detailed views of these pin positions are shown on the following page. IMPORTANT NOTE: - ENSURE ALL PINS ARE SECURED BEFORE LIFTING HALO Compact User Manual V7 December 2019...
Page 27
Page 27 of 60 Detailed view showing front link position between the FG-HALO-C and a HALO-C. Detailed view showing rear link position between the FG-HALO-C and a HALO-C. HALO Compact User Manual V7 December 2019...
HALO-C rear link pin point. Detailed views of these pin positions are shown on the following page. IMPORTANT NOTE: - ENSURE ALL PINS ARE SECURED BEFORE LIFTING HALO Compact User Manual V7 December 2019...
Page 29
Page 29 of 60 Detailed view showing front link position between the SM-HALO-C and a HALO-C. Detailed view showing rear link position between the SM-HALO-C and a HALO-C. HALO Compact User Manual V7 December 2019...
Lock the two HALO-C together by pining the rear captive links to upper cabinet. IMPORTANT NOTE: - ENSURE ALL PINS ARE SECURED BEFORE LIFTING HALO Compact User Manual V7 December 2019...
Positions lower than 5- degrees will produce up-tilt when required. Lock the two cabinets together by pining the rear captive links to upper cabinet. IMPORTANT NOTE: - ENSURE ALL PINS ARE SECURED BEFORE LIFTING HALO Compact User Manual V7 December 2019...
Use the 5 degree option to mount the HALO-C at 0 degrees to the FG-HALO-C. Use the quick release pins to lock the HALO-C captive link to the FG-HALO-C HALO Compact User Manual V7 December 2019...
Use the 5 degree option to mount the HALO-C at 0 degrees to the HALO-CS. Use the quick release pins to lock the HALO- C captive link to the HALO-CS. HALO Compact User Manual V7 December 2019...
For the top section of an array, the FG-HALO-C can be attached using the method shown on page 25 and can be configured with desired flying accessories ready attached to a motor or rigging point. HALO Compact User Manual V7 December 2019...
If using the HALO-CS as part of an array, count one HALO-CS as two HALO-C. For example, if using three HALO-CS, you can have a maximum of 18 HALO-C flown underneath as per the drawing on the right. HALO Compact User Manual V7 December 2019...
Page 36 of 60 10.2 - HALO-C Flown – SM-HALO-C A maximum of six HALO-C can be flown from the SM-HALO-C. The HALO-CS cannot be flown from the SM-HALO-C. HALO Compact User Manual V7 December 2019...
10.4 - HALO-C Ground Stacked – HALO-CS A recommended maximum of 6 HALO-C can be ground-stacked on the HALO-CS when the centre of gravity remains within its footprint. HALO Compact User Manual V7 December 2019...
11.1 - Connecting HALO-C A maximum of 4 x HALO-C can be connected to 1 amplifier channel. If a non EM Acoustics amplifier is being used, check that the amplifier loads to 2 ohms as well as being able to deliver the correct power.
2500-3000 watts into a 2-ohm load. NOTE: A small amplifier working too hard is much more likely to damage your loudspeakers than a large amplifier working well within its limits! HALO Compact User Manual V7 December 2019...
For more demanding environments, HALO-C can be supplied with Van Damme PA-CON connectors (male/female) which provide an IP65 connection rating when mated. Other options may be possible by special order – please contact EM Acoustics to discuss your requirement. HALO Compact User Manual...
As illustrated, both examples above would use the same preset file recalled into the amplifier, all that is different is the number of amplifier channel pairs required – all of which require the same preset recalled. HALO Compact User Manual V7 December 2019...
Page 42
A and one of amplifier B. As illustrated, regardless of the combination of amplifiers used, or how the loudspeakers are wired, the preset to be recalled is determined by the number of elements in the array. HALO Compact User Manual V7 December 2019...
EQ filters applied to only one section of an array will impose a group delay on that part of the system, which will bring further acoustical issues. HALO Compact User Manual V7 December 2019...
12.3.1 - Connections The four amplifier channels appear on four speakON connectors on the rear of the DQ Series amplifiers. HALO-C is a passive system and as such requires only one amplifier channel. HALO Compact User Manual V7 December 2019...
The presets available are: HALOCS.Sub Standard HALO-CS subwoofer preset 12.4 – Use with the DSC48 Controller The same family of presets are loaded onto the DSC48 system controller, and the recall procedure is exactly the same. HALO Compact User Manual V7 December 2019...
‘break’ the array. It is appreciated that whilst it is not acoustically ideal to break the array in some ways (slight loss of coupling for example) we at EM acoustics believe the benefits of being able to approach otherwise challenging venues makes the addition of this feature worthwhile.
Reinstate the panel and the screws and retighten. Return the AMT to vertical, and locate the four studs on the back surface in their locating holes in the enclosure. Once located, turn the enclosure back onto its front, and HALO Compact User Manual V7 December 2019...
M5 socket cap bolts (with flat and spring washers) and tighten until firm. 4. Now, follow step 6 above for reinstating the AMT drive unit to reassemble the HALO-C enclosure. HALO Compact User Manual V7 December 2019...
!!) and reinstate the six screws. Note that two of the screws are shorter – these fit the central hole in the grille. HALO Compact User Manual V7 December 2019...
2m with 4W sine wave input and referenced to 1m. Nominal dispersion, measured in an anechoic environment and averaged over stated bandwidth. Calculated and verified by subjective listening test of familiar program material. HALO Compact User Manual V7 December 2019...
2m with 4W sine wave input and referenced to 1m. Nominal dispersion, measured in an anechoic environment and averaged over stated bandwidth. Calculated and verified by subjective listening test of familiar program material. HALO Compact User Manual V7 December 2019...
04A030 RFG-HALO-CS Replacement grille/fabric for HALO-CS 04A030W RFG-HALO-CSW Replacement grille/fabric for HALO-CS - WHITE 05A019 HALO_PIN ¼” x ½” ball-lock flying pin with 4” lanyard 07A027 PX-HALO-C Replacement passive crossover assembly for HALO-C HALO Compact User Manual V7 December 2019...
EM Acoustics will pay for return freight should the repair be covered under warranty. EM Acoustics’ liability is to the replacement or repair (at our discretion) of any defective components, and as such are not liable for any incidental and consequential damages including (without limitation) injury to persons, damage to property or loss of use.