Rigging Halo-Cs And Halo-C - EM Acoustics Halo Compact System User Manual

Page 31 of 60

7.4 - Rigging HALO-CS and HALO-C

IMPORTANT NOTE: -
ENSURE ALL PINS ARE SECURED BEFORE LIFTING
Locate the two
together by the front links and
lock together using the quick
release pins.
Then extend the rear captive
link of the lower cabinet to the
desired angle.
To set the HALO-C parallel to
the grid, select the 5-degree
hole. Positions lower than 5-
degrees will produce up-tilt
when required.
Lock the two cabinets together
by pining the rear captive links
to upper cabinet.
HALO Compact User Manual
V7 December 2019
cabinets