Rigging Two Halo-Cs Together - EM Acoustics Halo Compact System User Manual

Page 22 of 60

6.2 - Rigging Two HALO-CS together

Place the two HALO-CS' on top
of each other. The rubber feet
will help
approximately.
Lower the two front captive
links in the upper HALO-CS and
lock in place using the quick
release pins
Extend the rear captive link in
the lower HALO-CS and lock in
place using the quick release
pins
Lock the two HALO-CS together
by pining the captive links to
their opposite speakers
Detailed views of these pin
positions are shown on the
following page.
IMPORTANT NOTE: -
ENSURE ALL PINS ARE SECURED BEFORE LIFTING
HALO Compact User Manual
line them up
V7 December 2019