Section 8.1: Depth Setting (Switches 9 Thru 11) - Nabco Acusensor M Installation Manual

www.NabcoEntrances.com
Rev 8-25-17
SECTION 8.1: Depth Setting (Switches 9 thru 11)
DN 1561
Table 9 Depth for Operation Mode: Normal, Doorway 1, and 1st Row OFF
Depth
9 10 11
6
5
4
3
Operation Mode
ECO Mode
No Monitoring
Inactive
* Used for adjusting detection area depth and confirming test command input, during installation only. For detailed information
please refer to Subsection 6.a.b.
Row 1
Row 6
Detection Area Diagram
Normal This row is active, but not applied to the monitoring function.
Doorway 1 This row is active, and is applied to the monitoring function.
1st Row OFF Inactive
X Directional presence detection. For detailed information please refer to Subsection 6.a.a.
X Same Depth Rows are Active.
X These rows are active, but not applied to the monitoring function.
X Depth Rows Active.
Depth Rows are not Active.
Presence Detec on Area
9 10 11
2
5-6 ECO
4-6 ECO
*Area
Check
AcusensorMInstallationManual
Note:
Row 1 is the Threshold Area
Figure 9 Presence Detection Area
Detection Area Diagram
P/N C-00187
15 of 28