Table of Contents
Advertisement
www.NabcoEntrances.com
Rev 8-25-17
CHAPTER 1: SAFETY
Warning labels are universal and used to alert an individual of potential harm to one's self or to others. The following warning
SECTION 1.1: Warning Labels
labels are listed in a hierarchy order that defines the most potential danger first, and the least potential danger last.
Indicates potentially dangerous situations. Danger is used when there is a hazardous situation
DANGER
where there is a high probability of severe injury or death. It should not be considered for
property damage unless personal injury risk is present.
Indicates a hazardous situation which has
WARNING
considered for property damage unless personal injury risk is present.
Indicates a hazardous situation which
CAUTION
when there is a possibility of serious injury. Caution should not be considered for property
damage accidents unless a personal injury risk is present.
Attention: A situation where material could be damaged or the function impaired.
Notice: Indicates a statement of company policy as the message relates to the personal safety or protection
of property. Notice should not be used when there is a hazardous situation or personal risk.
Note: Indicates important information that provides further instruction.
SECTION 1.2: General Safety Recommendations
Do not place finger or uninsulated tools inside the electrical controller. Touching wires or
DANGER
other parts inside the enclosure may cause electrical shock, serious injury or death.
Disconnect power at the fused disconnect during all electrical or mechanical service. When
WARNING
uncertain whether power supply is disconnected, always verify using a voltmeter.
If the door appears broken or does not seem to work correctly, it should be immediately
CAUTION
removed from service until repairs can be carried out or a qualified service technician is
contacted for corrective action.
Notice: Read, study and understand the operating instructions contained in, or referenced in this manual
before operating. If you do not understand the instruction, ask the installing qualified technician to
teach you how to use the door.
Notice: This manual must be given to and retained by the purchasing facility or end user.
Notice: Advise the purchasing facility or end user to make regular safety checks and all other duties that may
apply.
Notice: All electrical troubleshooting or service must be performed by qualified electrical technicians and
must comply with all applicable governing agency codes.
Attention: DO NOT install the Acusensor M on a Transom. The infrared beam may be interupted, causing
Doorway Monitoring malfunction.
Attention: Check for total current consumption of Devices being connected to the Motor/Operator. In the
event current consumption is exceeded, malfunction or failure may be caused.
Note: To prevent misunderstanding, explain to Owner in advance: When [Doorway 1] or [Doorway 2] is used,
the door may be opened and closed several times to learn the door condition after power-on or after the
environment changed significantly.
some
probability of severe injury. It should not be
may result in a minor injury
AcusensorMInstallationManual
P/N C-00187
. Caution should not be used
3 of 28
Hide quick links:
Advertisement
Table of Contents
