Tadiran Telecom SUV2-H18/1CFA-N Service Manual page 65

Procedure
Septum
12. Gas liquid separator and diaphragm
Use screwdriver unscrewed the fi xed screw of gas-liquid
separator, the upward gas-liquid separator, gas-liquid
Gas-liquid separator
separator is desirable.
Use a screw knife clapboard and chassis have fi xed screw
drive, partition is desirable.
13. Split the valve and valve support
Pull out the valve block with the hands or tools.
Screwdriver unscrew the valve and valve bracket set
screw, remove the air valve subassembly and hydraulic
valve. (open air valve subassembly of spot welding, take
down the various valve) Screwdriver unscrew the valve
bracket and the chassis of the fi xed screw, take down the
valve support.
Removal Procedure Removal Procedure
Note
61