Tadiran Telecom SUV2-H18/1CFA-N Service Manual page 50

Removal Procedure Removal Procedure
Grille
Axial fl ow blade
46
Procedure
Front panel
Motor
4.Remove grille and panel
A: Remove connection screws between the front
grille and the front panel. Then remove the front
grille.
B: Remove connection screws connecting
the front panel with the chassis and the motor
support, and then remove the front panel.
5.Remove axial fl ow blad and
Remove the nut fi xing the blade and then
remove the axial fl ow blade.
Remove tapping screws fi xing the motor
anddisconnect the leading wire insert of the
motor. Then remove the motor。
6.Remove big handle valve cover
Big handle
Remove the connection screw fi xing the big handle
and then remove the handle.
Use a screwdriver to fi xed valve cover screwdrive,pull
up to remove the valve cover.
valve cover
Note
Motor