Tadiran Telecom SUV2-H18/1CFA-N Service Manual page 62

Removal Procedure Removal Procedure
Front panel
Left side plate
58
Procedure
side plate
4.Open the side plate
Use screwdriver unscrewed the fi xed screw of the side plate
and the chassis, and then descend into the handle of the side
plate hole by hand press, make the side plate and on the right
side of card board, panel button out, again ask outside, can
remove the side plate.
Remove panel
Remove connection screws connecting
the front panel with the chassis and the motor
support, and then remove the front panel.
Remove left side plate
Remove connection screws connecting the
left side plate with the condenser assy. Then
remove the left side plate.
5.Remove
Use a screwdriver to fi xed valve cover screw drive,
pull up to remove the valve cover.
Valve cover
Note
Valve cover