Tadiran Telecom SUV2-H18/1CFA-N Service Manual page 64

Removal Procedure Removal Procedure
Motor support
60
Procedure
9. Remove motor support
Remove tapping screws fi xing the motor andlift
the motor support to remove it.
10. Remove 4-way valve assy
Unsolder the spot weld of 4-way valve assy,
compressor and condenser, and then remove
the 4-way valve assy .
Discharge the refrigerant completely before
unsoldering,when unsoldering, wrap the gas
valve with awet cloth completely to avoid
4-way valve assy
damage to thevalve caused by high
temperature.
When unsoldering the spot weld, wrap the
4-way valve with wet cloth completely to avoid
damaging the valve due to high temperature.
11. Remove Expansion valve Assy
Unsolder the spot weld of expansion valve
assy, liquid valve and condenser, and then
remove the expansion valve assy .
Open the suction of spot welding, remove the suction
pipe.
Note
Warning