GEM 566 Operating Instructions Manual page 92

12 Specific data IO-Link (pin 6)
12.4.24 Basic settings
The different settings are summarized with the Basic settings parameter.
In- Sub Off- Access
dex - set Rights
In-
dex
0x50 1 0 R/W
2 1 R/W
3 2 R/W
4 3 R/W
Description of parameter values
Index name
Basic settings Inversion of LED col-
IO-Link process data
GEMÜ 566
Lengt Index name
h
Basic settings
1 bit
1 bit
1 bit
1 bit
Parameter
ours
On site initialization
Operating mode
Parameter
Inversion of Boolean
LED colours
On site Boolean
initialization
Operating mode Boolean
IO-Link process Boolean
data
Values
(Standard) LEDs Close = green and Open = yellow (not
0
inversed).
(Inversed) LEDs Close = yellow and Open = green (inversed).
1
(Enabled) On-site initialization (see "Initialization",
0
page 101) activated.
(Disabled) On-site initialization (see "Initialization",
1
page 101) deactivated.
0 Operating mode for positioner activated.
1 Operating mode for OPEN/CLOSE control activated.
(Disabled) Use of IO-Link process data (see "Process data",
0
page 76) is deactivated.
(Enabled) Use of IO-Link process data (see "Process data",
1
page 76) is activated.
92 / 112
Type Default
0
0
0
0
Description
www.gemu-group.com
Values
0
1
0
1
0
1
0
1